Features:
Applies pressure on workpiece face when edge-clamping to prevent bowing and buckling large panels
Clamp attaches to any length 2 x 2's (lumber and wood clamp pads not included)
Adjustable length clamp provides pressure from all four sides — ideal for big projects such as gluing table tops and shelving. To make wood pieces, drill a series of 5/8" holes spaced 2" apart down the center line of the board face of a 2x4 piece of lumber. Then rip the board lengthwise through the centers of the holes, creating two pieces approx. 1-1/2" x 1-11/16". Rotate the notched boards so that notches are away from each other.
