Premium CPM V3 Replacement Blade for No.5 Low Angle Jack Plane (No.62)
The size of the blade is:
115mm length
51 width
4.5mm thickness
There are 3 levels of sharpness to choose from:
Level 1 sharpness - Sharpened on a grinder only (you need to hone the blade)
Level 2 sharpness- Hand sharpened primary level
Lever 3 sharpness- Hand sharpened high end level
This blade is made out of superior premium steel CPM V3, that works much better than regular blades, even A2 steel, and holds the sharpness very long.
* The steel layer and the base material are inlaid with grooves on three sides, and the edge of the blade groove is inserted in a dovetail structure with a slight angle of 2 degrees!
* The inner half-circle structure at both ends of the chute slider can directly change the direction when equipped with Norris mechanism and pressure bar tongue pressing structure!
Performance characteristics:
～3.5mm thick TC4 titanium alloy substrate, high strength!
～Blade steel: American BOS heat-treated cpm3v powder steel for directional use, HRC60.7, and the impact toughness of the cutting edge reaches 95 joules, super toughness!
～The whole blade is natural and permanent anti-rust
～The entire blade is 3.5mm thick, The titanium base provides a "soft" buffer support for the blade steel, ensuring stable cutting like butter!
(Soft support planing is the outstanding feature of this blade! The significance is even greater than the sharpness retention)
～Independent property right design: The counterbore groove design of the blade body, which comes with the sliders of the "Norris" and "Tongue And Groove" adjustment mechanisms of various brands, perfectly fits most domestic and foreign brands of conventional angle European planes, American, Luban, etc.,
It can plane hardwood up to 3000 shavings with one sharpening. Even then, looking at microscope, the blade is still in a very good condition.
Planing hardwood smoothly and effortlessly.
Three unique outstanding performance characteristics:
~ Customized BOS company special data heat treatment powder steel, creating a strong sharpness retention performance!
～Thick titanium-based "soft and soft" cushioning support, the cutting edge does not vibrate or tremble! Experience the touch of planing!
～Grinding efficiency ratio in the shortest time:
* The bevel of the blade angle is about 1.2 cm wide and can be easily sharpened by hand without the aid of a fixed-angle sharpener!
* The whole blade is ultra-lightweight, and there is no weight sinking at the end of the blade when grinding, even if there is no freehand sharpening experience, it can be easily sharpened and honed.
* The blade steel is thin, the sharpening efficiency is even faster than that of the carbon steel blade, and the sharpness value can be restored within 15 minutes at most in daily use!
