FS-600
This radiation tester can be widely used in decoration stone testing, industrial nuclear pollution testing, geological survey testing and so on. The portable design and powerful functions allow you to use it easily and get accurate results. If you are looking for a new tester, come and try this product, it will not let you down.
Features:
Real-time Detecting&Total Dose: It can detect radiation dose rate in real time and record cumulative dose value at the same time.
Three Power Supplys Ways: This detector supports battery and USB two ways of power supplys. This device can be powered by the built-in button battery or directly by USB cable or 3 * AAA batteries.
Various Screen Display Functions: You can adjust the alarm reading value, screen backlight, real-time dose rate curve display function and so on according to your needs.
Built-in Data Storage Card: Some data such as accumulated dose value, dose rate alarm reading value and dose alarm threshold value will not be lost after power failure.
High Performance Chip: It adopts 32 bit processor, strong anti-interference ability and high detection precisions ranges.
Wide Applications: This radiation tester can be widely used in decoration stone testing, industrial nuclear pollution testing, geological survey testing and so on.
Easy to Operate: You can enter the setting interface by one button to adjust the alarm preset value, time, Chinese and English switching backlight mode, curve display, particle sound switch and other functions.
Specifications:
Material: ABS
Dose rate ranges: 0.1μSv/h~10mSv/h
Dose ranges: 0.00μSv~10Sv
Sensitivity: >1cps/uSv/h (under the source of Condition Co60)
Relative intrinsic error: <±10% (at 1mSv/h)
Alarm threshold: 0.5 (Adjustable)
Sensitivity: 80cpm / μSV / Co-60
The maximum dose equivalent rate: 99.99μsv/h
Power supplys: 1 * cr1220 battery(included) or USB cable (included) or 3 * AAA batteries(included)
Power consumption: <150mW
Package size: 160 * 60 * 25mm / 6.3 * 2.4 * 1.0in
Package weight: 160g / 5.6ounce
Packing list：
1 * Radiation Detector with Battery
1 * USB Cable
1 * User Manual
3 * AAA Batteries
Features:
Handheld instrument design, built-in high-performance batteries for easy to carry around with you.
Equipped with data record function, and the time interval can be set on the menu manually.
The data can be exported to computer, it will generate a file a day, the electromagnetic data and Geiger count data are stored in different folders, and also support check the recorded data.
The shutdown timer can be set, provide no shutdown/5 minutes/10 minutes/30 minutes shutdown settings.
Support alarm value setting, language settings.
Built-in temperature and humidity detection-sensor, the temperature measurement-range is -15°C to 110°C.
High detection sensitivity, especially for environmental radioactivity monitoring to detect traces of electromagnetic radiation.
It can help detect the intensity of γ ray and detect high energy beta rays.
It also can detect electromagnetic waves which emitted by general electrical appliances, such as computers, TV, mobilephones, microwave ovens and other commonly used electrical appliance.
Comes with a plastics storage box, orderly storage and easy to carry around with you.
Specifications:
Name: Geiger Counter
Model: JD-3001
Material: ABS
Color: orange+black
Cumulative dose equivalent: H P (10) 0.0usv-99.99msv
Dose equivalent rate: H P(10)0.1USV/H-9.99MSV/H
Response time: 3S
Dose response: <±20% (1usv/h-99.99msv/h)
Energy response: <±30% (48KeV-1.3MeV)
Relative inherent error: <±15%
Battery: 1 * lithium battery, 3.7V, 1800mAh (included)
Item size: 175 * 70 * 30mm / 6.89 * 2.76 * 1.18in
Item weight: 230g / 8.11ounce
Package size: 195 * 95 * 35mm / 7.68 * 3.74 * 1.38in
Package weight: 470g / 16.58ounce
Packing List:
1 * Geiger Counter
1 * Plastics Box
TC-8500
This product is one small type high sensitivity radiation dosage alarm device, mainly used to monitor the α, β, γ and X rays. It has the characteristics such as high sensitivity and accurate measurement. Widely applied in the environment where existing ionize radiation environment, human body accepted radiation dosage supervise and protection, such as family decoration, radiation shining manufacture enterprises, hygiene, nuclear lab, nuclear station, building materials, petroleum chemical, geology general investigation, used steels, industry flaw detection and others.
Features:
With high detection sensitivity, especially for environmental radioactivity monitoring to detect traces of nuclear radiation.
Configured 3.2inch large LCD colorful screen, with backlight, 320*240 resolution, clear display definition, you can see the real time data clearly.
The dosimeter uses a Geiger-Muller counter tube to measure radiation, when each-ray passes through the G-M tube and causes ionization, the G-M tube generates a detection current pulse, and each pulse is detected by the electronic tube circuit and recorded as a count. (The displayed value of this dosimeter is the count value in the mode you selected.)
Due to the randomness of radioactivity, the count value detected by the dosimeter varies from minute to minute, so it is more accurate to take the readings within an average period of time, and the longer the interval is, the more accurate the average counts.
The detector is used to measure α, β, γ and X rays radiation, it is optimal for measuring small changes in radiation levels, and has high sensitivity for most commonly used nuclides.
Two working modes design, you can switch between ionization mode and electromagnetic mode according to your demands.
The instrument support setting parameters, preset the alarm value and with sound alarm function, and 5 gears of volumes of alarm sound adjustable.
Temperature unit adjustable design, support conversion from ℃ or ℉ according to your preference easily.
Data recording interval setting design, you can set 10 seconds, 30 seconds, 60 seconds, 3 minutes, 10 minutes, 30 minutes and 1 hour data recording interval time.
Multifunctional design, with Chinese and English language switch function, time set, data delete and measurement units switchable function.
With shutdown time setting function, one button to select 10 minutes /30 minutes /1 hour /2 hours.
Specifications:
Name: Nuclear Radiation Detector
Material: ABS
Resolution: 320*240
Power supplys: 1 * 3.7V, 2200mAh rechargeable battery (included)
Ray Detection: α, β, γ and X rays
Energy Ranges: 20keV-3.0MeV≤±30% (137Cs-)
Detector: Energy Compensation G-M Tube (Geiger Counter)
Sensitivity: 80CPM/μSv/h (for Co-60)
Test resolution: 0.01μSV/h
Real time measurement ranges: 0-99.99μSV/h
Accumulative measurement ranges: 0-99.99μSV/h
Real time measurement error: ≤10％
Mean value error: ≤3％
Data record: 999 groups
Temperature ranges: -20℃ to 60℃
Temperature resolution: 2℃
Humidity ranges: 0-100%
Humidity resolution: 0.3%
Item size: 222 * 80 * 45mm / 8.74 * 3.15 * 1.77in
Package size: 280 * 210 * 90mm / 11.02 * 8.27 * 3.54in
Package weight: 750g / 1.65lb
Packing List:
1 * Nuclear Radiation Detector
FS2011 radiation individual alarm device is collocated with highly flexible Geiger counting pipes as detector; it is mainly responsible for monitoring the radiation of X, r and hard β ray in various radioactive work areas; it is featured as swift response and broad measurement scope, it is able to display the dosage equivalent rate in the work area; it is widely applied in the individual safety protections monitor and radioactive indication for work personnel in the following fields: nuclear power plant, accelerator, iron & steel industry, chemical industry, isotope application, industrial X and r non-destructive flaw detection, r radiation, radioactive laboratory and surrounding environment monitor of nuclear facilities.
Features:
Portable Size: This handheld nuclear radiation detector with portable size and easy to carry, you can put it into your bag to carry and hold it to use.
Wide Applications: This radiation tester can be widely used in nuclear power plant, accelerator, iron & steel industry, chemical industry, isotope application, industrial X and r non-destructive flaw detection, r radiation, radioactive laboratory and surrounding environment monitor of nuclear facilities.
Large Display Screen: This nuclear radiation detector adopt large LCD display screen for you to read the detecting data clearly and easily, you can get the results in time.
Easy to Operate: You can enter the setting interface by one button and then close the tester to object to get the result.
Two Data Display: This tester can display real-time measurement and the five-minute average.
Three selective alarm modes: sound, light and text prompt, it display the safe ranges or exceed the range, you can long press the "↓" button for 3 seconds, text prompt will appear.
Specifications:
Material: plastics
Detection ray: X, r and hard β ray
Measurement scope:
Dosage equivalent rate: 0.01~1000 μSv/h (maximum: 10 mSv/h)
Accumulative dosage equivalence: 0.01 μ Sv~500.0 mSv
Energy scope: 50 keV~1.5 MeV ≤ ±30 % (as for 137 Cs I)
Relative innate error: ≤ ± 15 % (137 CS 1mSv/h)
Flexibility: 80 CPM/μSv/h (as for Co-60)
Unit of dosage rate: μSv/
Utilization environment:
Temperature: -10℃~45℃
Relative humidity: ≤ 95 % (+45℃)
Power: 2 * AA battery (NOT INCLUDED)
Package size: 175 * 110 * 35mm / 6.9 * 4.3 * 1.4in
Package weight: 260g / 9.2ounce
Packing list:
1 * Radiation Detector
1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
2) Payment must be made within 3 days of order.
3) If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.
