Electric threading machine die M10 M12 M14 M16 M18 M20 M22 M24 M30 thread dies cutting tool metric pipe threading machine dies
When the thread machine working, first put the pipe to be processed into the pipe chuck, hit the chuck, press the start switch, the pipe will rotate with the chuck, adjust the size of the die opening on the die head, and set the wire The length of the mouth. Then turn the feed handwheel clockwise to make the die cutter on the die head stick to the end of the rotating pipe with constant force, and the die cutter will automatically cut the pipe thread, and the cooling system will automatically spray oil for cooling on the die cutter. , When the thread mouth is processed to the preset length, the die cutter will automatically open, and the thread mouth processing is over. Turn off the power, knock the chuck, and take out the pipe. The threading machine also has a pipe cutting function: put the pipe in The pipe chuck, impact and chuck, start the switch, put down the knife holder on the knife feed device, pull the knife feed handwheel, move the blade on the knife holder to the length point you want to cut, and gradually rotate the knife on the knife The handle makes the blade squeeze the rotating tube, and the tube is squeezed and cut by the blade after 4 turns and 5 turns.
Support customize！need other pls contact us！
