NanoVNA V2 Vector Network Analyzer 2.8inch Display 1950mAh SAA-2) 50kHz-3GHz Shortwave 3GHz HF VHF UHF Antenna Analyzer voltage standing wave ratio, phase, delay, Smith chart
Specifications
Product size: 13*9*4cm/ 5.12*3.54*1.58inch
Product weight: 0.25kg/ 0.55lb
Material: acrylic
Colour: Black
Frequency range: 50kHz-3GHz
System dynamic range (calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 noise floor (calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Scan speed: 100 dots/sec
Display: 2.8", 320 x 240
USB interface: micro USB
Power supply: USB, max. charging current 1A
Battery: 1950mAh Li-Ion
Battery connector: JST-XH 2.54mm
Max. scan points (on device screen): 201
Max. scan points (USB): 1024
Port 2 return loss (1.5GHz): 20dB typ
Port 2 return loss (3GHz): 13dB MIN
VNA-QT software compatible systems: Linux, Windows (7+), MacOS planned
Product List
S-A-A-2 main unit (built-in 1950mAh battery) x 1
USB data cable x 1
30cm SMA male to male SS405 RF cable x 2
SMA Easy Calibration Kit OPEN *1
SMA simple calibration kit SHORT *1
SMA simple calibration kit LOAD *1
SMA female to female connector *1
DIY accessories
Product Features
Frequency range of 50kHz-3GHz, system dynamic range (calibration) of 70dB (up to 1.5GHz), 60dB (up to 3GHz), The direct output of the 50K-1500MHz frequency range is equipped with a dynamic range of better than 70dB and the extended 150M-3000MHz band is equipped with a dynamic range of better than 60dB。It has a display size of 2.8 inches, 320 x 240.
Scanning Performance
The scanning speed is 100 points/second, the maximum scanning point of the device screen is 201, the maximum scanning point of USB is 1024
Charging mode】：Lithium electronic battery is included, with a capacity of 1950mAh, which can be charged for the device via the USB port, which is compact and convenient to use as you go
Calibration Mode
The initial calibration data is not automatically loaded, recalibration or dialing back the calibration data is required after starting the device and frequency change. Even if the frequency changes, this product does not randomly insert calibration data.The working time is 6 hours, with an efficient endurance.
Software compatibility
Compatible with many systems, Linux, Windows (7+), MacOS planned
