Parameter characteristics:
■High-definition LCD display, Chinese and English optional pages display programming parameters, faster and easier to write programs.
■Intelligent positioning of X and Y axis, manual adjustment can also be used to remove the positioning device of the manipulator as required
■Built-in dwell time and unloading delay setting function, the operation is simpler, no time relay is needed, and the cost is reduced.
■I has a one-key backup and restore function, which can always restore parameters as needed, reducing maintenance costs. Supports multi-step programming, complex workpieces can complete a process, improving production efficiency and mechanical accuracy.
■All buttons on the panel are micro switches, which have passed strict EMC temperature and vibration tests to ensure product stability and service life.
■CE certification to meet the needs of overseas markets
Single-Step Description
1. The default page is SINGLE; also, you can press the P key several times, switching to the SINGLE page.
2. Press Arrow Keys to select the parameter you want to program.
3. Press Numeric Keys to program a desired value.
4. Press Enter Key to complete the setting.
5. Follow the above methods to program the other parameters.
6. After finishing the program, press Startup Key to run the device.
Multi-Step Description
1. Press the P key several times, switching to the PROGRAMS page.
2. Press Arrow Keys to select a desired No, or you can press Numeric Keys to input a desired No, and then press Enter key to enter the General Parameters page.
4. Press Arrow Keys to select the parameter you want to program.
5. Press Numeric Keys to program a desired value.
6. Press Enter Key to complete the setting.
7. Follow the above methods to program the other general parameters.
8. After finishing the program, press <arrow right> key to enter the Step Setting page.
9. Follow the above methods to program the other step parameters.
10. Press <arrow right> or <arrow left> key to enter the others Step Setting page, and program the desired parameters.
11. After finishing the program, you should back to the Total Parameters page or the Step 1 page, and press Startup Key to run the device
