For product safety, we will pack the products you need in wooden boxes.

 TOOL HOLDER                             WRENCH

 TONTROL BOX                            CONNECTING CABLES

 TOOL HOLDER                                CROSS WRENCH

 1. High repeat positioning accuracy

 2. Large size and high rigidity desigh

3. Control box PC resistive material

Working principles and characteristcs:

Model LD4B electric turret is driven by the worm and gear,engaged and locked by the advanced three-gear disc. It is transposable stably and don’t   need to be lifted, so it prevents cutting fluid from enering the turret while transposition.When transpnsition, non-contact Hall element is applied to send signals.This seried of turret is the representative product of domestic CNC industry in recent years.

      Instructions for use of electric tool rest control box:

      Features:

      When the tool is changed, the CNC system sends an OV forward signal at the J1 pin, and at the same time starts to detect the corresponding tool position signal. After reaching the tool post tool position, the corresponding tool position line (the third pin of the Hall element) outputs the OV signal, and the CNC system detects After the signal is received, J1 is called to cancel the forward rotation signal, and at the same time, the J2 pin outputs the reverse signal. After a certain delay, the reverse signal is cancelled and the tool change program is completed. The delay time is set by the system. The control box has a built-in surge absorber, so there is no need to connect it again when wiring. This product is suitable for 4-6 station electric tool post.

① Three-phase power                  ② Computer interface

③ Tool holder interface                 ④ Motor port