Introduction :
MODEL |
CNC Frame 3040L/6040L |
|||
Attribute |
3 axisWithout Motor |
3 axis With Motor |
4 axis Without Motor |
4 axis With Motor |
Axis |
3axis |
3axis |
4axis |
4axis |
Have motor? |
No |
Yes |
No |
Yes |
Have 4thaxis? |
No |
No |
Yes |
Yes |
Weigh |
30 |
34 |
33 |
37 |
Rack material: |
6061 and 6063 Hard aluminum alloy |
|||
Table material: 3040 6040 |
320 * 520mm (20mm aluminum alloy T table) 480 *740mm (20mm aluminum alloy T table) |
|||
Engraving area: 3040 6040 |
260*380*110mm 360*570*120mm |
|||
Z-Axis Stroke: 3040 6040 |
110mm, Engraving depth depends on the length of the tool edge 120mm, Engraving depth depends on the length of the tool edge |
|||
Acceptable material thickness: 3040 6040 |
≤ 135mm ≤ 140mm |
|||
Rail type: |
Square line rail track, three-axis is 20 mm square wire track, high precision, high strength, top configuration. |
|||
Type of screw: |
Ball screw 1605 |
|||
Diameter of Spindle motor: |
80mm |
|||
Motor |
Nema 23 (57*76mm) |
|||
Rotation Axis (4thAxis) Description: |
Chuck: 65MM 4-jaw chuck Center height: 54MM Speed reducing ratio: 4:1 Stepper motor: Two phase 42 stepper motor |
|||
