Metric Tap And Die Set By Us Pro 110 PC High Speed Steel
Outer box Black/Red/Blue,Random shipments color of outer box,Mind the color, place your order carefully. Thank you!
Precision machined, Tungsten steel taps and dies. Dies are split to help facilitate the fine adjustment of core diameter. Set includes Metric coarse and fine sizes.The set includes two sliding jaw type tap wrenches and T-Bar type tap wrench together with two steel die holder with knurled screws.The taps and dies contained in this set are precision tools.Precision machined, Tungsten steel taps and dies. Dies are split to help facilitate the fine adjustment of core diameter. Set includes Metric coarse and fine sizes.The set includes two sliding jaw type tap wrenches and T-Bar type tap wrench together with two steel die holder with knurled screws.Supplied in heavy-duty blow moulded storage case.The taps and dies contained in this set are precision tools.
Taps
To cut an internal thread, select the tap of the desired size, tap wrench, proper drill size or hole size, and lubricating or cutting oil.The proper hole size is very important in the formation of good threads. An oversized hole results in reduced thread height, an undersized hole will overload the tap and cause undue breakage Refer to the required drill size permanently marked on the shand of each tap and drill the hole to desired depth.Secure tap by the square in the tap wrench and start threads by turning clockwise Great care must be taken to start the tap square to the hole. As the tap is turned it bites into the metal and leads into the hole. After the tap has been started, metal chips that flow into the flute spaces must be broken to relieve pressure on the tap.
Dies
o cut an external thread, such as on a bolt, select the correct die for the rod being threaded, die stock, and lubricating or cutting oil. Size of the rod or bolt, is of great importance. It must be no larger than the desired thread, and preferably 005" to 010" undersized. Oversized work may damage the die and will make turning very difficult.Slightly undersized work is easier to thread and furnishes enough thread height for normal use.After securing the part being threaded, insert the die into the die stock and run the screw snugly into one of the recesses in the outside surface of the die. (The recess and slot pattern of dies allows use with a variety of die stocks.)
35 x plug taps
M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5
35 x taper taps:
M2 x 0.4, M3 x 0.5,M4 x 0.7,M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5
35 x dies
M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5.
Specifications
Material:Tungsten Steel Sub-Type:ENGINEERING TAP AND DIE SET Tap holder:M3 - M12 (1/16" - 1/2") Tap holder:M6 - M20 (1/4" - 3/4") Tap wrench:T bar Die holder:Total length 200mm (1" diameter bore) Die holder:Total length 270mm (1 1/2" diameter bore) taper taps:35pcs plug taps:35pcs dies:35pcs
Package Content
2 x tap holders (different size) 1 x T- bar tap wrench 2 x Die holder (different size) 35 x taper taps 35 x plug taps 35 x dies 1 x Portable Storage Case
