The operation is simple
1.Put the screw nut, rivet nut sensed a light pressure.
2.Riveting nut, after induction to automatically rotate the nut inlet.
3.After rotating the air inlet, pull the trigger and pull the rivet nut gun backward to deform the nut.
4.Trigger continue not to put, nut after deformation, automatic gun exit from the nut, to complete a job step.
Replace the tie rod
Turn counterclockwise to open
No tools requireda
1: Press and hold the pin and pull back.
2: Rotate counterclockwise and pull backward to replace the pull rod.
Adjusting stroke
1: Press and hold the pin and pull back.
2: Reverse time and clockwise rotation can adjust the stroke.
Adjust according to your own needs during work.
After locking, make the stroke more fixed.
