• 1.42 motor and 57 motor have different sizes, and the ports used for connecting cables are also different. Please choose according to the machine you use before purchasing.
• 2. The rotating shaft is suitable for most laser engraving machines. If it cannot be used after connecting to your machine, please try to reverse the order of the "green" and "blue" lines on the connecting line of the rotating shaft and connect it again.
• 3. After connecting the rotary axis, you need to change the step value of the rotary axis.
• 4. Since the package contains a small motor, it will be returned occasionally by the logistics provider. Please don't worry, we will resend it for you as soon as possible.
• 5. If you have any after-sales questions, please contact us, we will provide you with technical and after-sales support.
• 6.If the control board on your machine is customized or integrated with the line, you need to change the connection line according to your machine when using the rotary axis.

• 42/57 stepper motor universal (Different motor equipped with different acrylic plates for use).

• Maximum horizontal working area 300mm.

• Minimum engraving diameter 10mm.

• The height is adjustable, and objects with non-uniform diameters can be engraved. Such as beer bottles.

• Can with spring clamps, lighter objects can be engraved to prevent the objects from moving during work.Equipped.

• with aviation line, compatible with CO2 laser engraving machine.
  

Usage：

1. Pull out the 4-pin wire on X or Y axis stepper motor of Engraver.

2.Then insert the wire on stepper motor of Rotate Engraving Module.
(Need to change parameter of Y axis).

3. Place Rotate Engraving Module under the laser module and start to engrave.

• rotary module  + 4pin cable + Aviation plugs + Spring clamps + Instructions and Assembly Tools

• rotary module  + 4pin cable + Aviation plugs + Instructions and Assembly Tools