YAXUN YX-702B+ smd bga soldering rework station 220V 110V
1.the hot blast table and the welding table have digital display of working temperature,preventing the circuit board elements from damaging due to high temperature,more intuitive use and easier operation
2.electronic constant-temperature PID hardware controls loop transducer with temperature precision,without being affected by wind power
3.operates with diaphragm-type air pump,long service lifetime,large wind pressure and full air flow
4.the brand iron adopts the China-made ceramic heating core and thermocouple loop transducer
detail:
•Tempetature of hot air: 150°c--500°c adjustable
•TempetatureSoldering of soldering iron: 200°c--480°c adjustable
if your country use 110V POWER,We can change for you
sign and output voltage 24V guarantees the electronic elements and personal safety
YAXUN YX-850 Hot air gun Soldering station Hot air
desoldering station 220V 110V
YAXUN YX-850 Hot air gun Soldering station Hot air
desoldering station 220V 110V
1.Capacity: 23l/min (max)
2.Handpiece Length: 196MM
3.110V 220V available
4. fast shipping
Details:
Station Power consumption:
Pump: Diaphragm
Capacity: 23l/min (max)
Outer Dims: 225MM W x 160MM H x 145MM D
Handpiece Power Consumption: 100V-280W, 110V-240W,
120V-270W, 220V-270W, 230V-280W, 240V-280W
Hot Air Temp: 100-420°C
Handpiece Length: 196MM
Includes:
YAXUN 850
Handpiece Holder
Handpiece (nozzle not included)
FP Pickup with (S) wire 14MM
FP Pickup wire (L)
yaxun878D++ rework station
2 digital display
2 in 1 design,
hot air gun and soldering iron
very good quality
Usage:
1.suitable for unsoldering multiple cmponents,such as SOIC,CHIP,QFP,PLCC andBGA,etc(especially for flat cables and cable connectors).
2.applicable for hot contraction,heating,depainting,degluing,defrosting.preheating and rubber soldering,and so forth.
2.the air flow can be adjustable,and air blowing is big and gentle blowing plastic components won't be deformed. such as buzzer and external interface of mobile phone
4.automatic to blow cool air to safe the heating. temperature rapidly rises, and it can reach to the setting temperature only within 3 or 5 seconds. small volume light weigh, temp-control accurately
5. safely remove BGA-IC ,keep pins intact.Much more safe
yaxun881D rework station
2 in 1 design,
hot air gun and soldering iron
very good quality
LED digital display for hot air
Usage:
1.suitable for unsoldering multiple cmponents,such as SOIC,CHIP,QFP,PLCC andBGA,etc(especially for flat cables and cable connectors).
2.applicable for hot contraction,heating,depainting,degluing,defrosting.preheating and rubber soldering,and so forth.
features
1.the products adopt closed loop of transducer.MCU intelligent drive.Digital LED display.High-power.the temperature turn up is very fast. Temperature stabilization and is impervious to air, Use the brushless fan,and long life and low noise, it is good for lead free work too
2.the air flow can be adjustable,and air blowing is big and gentle blowing plastic components won't be deformed. such as buzzer and external interface of mobile phone
3.it is inductance in the handle, it will be quickly to work when you take the handle; when the handle is return to the shelf,the machine will automatic stopage
4.automatic to blow cool air to safe the heating. temperature rapidly rises, and it can reach to the setting temperature only within 3 or 5 seconds. small volume light weigh, temp-control accurately
5. safely remove BGA-IC ,keep pins intact.Much more safe
5 nozzles YAXUN YX-902+ hot air digital bga rework station smd heater soldering iron
5V,1A USB Output YAXUN 886D+ 2 in 1 SMD hot air & soldering station ,temperature Momery Function Rework station
