2.2KW Water Cooled Spindle Kit CNC Milling Spindle Motor +2.2KW VFD + 80mm Clamp+Water Pump+Water Pipe+13pcs ER20 Collet for CNC
Package Include:2.2kw Spindle Kit:
1 x 2.2KW CNC Water Cooled Spindle
1 x 2.2KW VDF
1 x 3.5M Water Pump
1 x 5M Water Pipes
1 x 80mm Spindle Clamp
13 x ER20 Collet (1,2,3.175,4,5,6,7,8,9,10,11,12.7,13mm)
1.5kw Spindle Kit:
1 x 1.5KW CNC Water Cooled Spindle
1 x 1.5KW VDF
1 x 3.5M Water Pump
1 x 5M Water Pipes
1 x 65mm Spindle Clamp
13 x ER11 Collet (1,2,3.175,4,5,6,7,8,9,10,11,12.7,13mm)
Feature:
1.2.2kw Water-cooled spindle motor
Engraving milling grind 80x230mm
Size:80x230mm(Middle body diameter:80mmxLength:230mm)
Power:2.2Kw
Voltage:220VAC
Frequency:0-400Hz
Speed:10-24000rpm
Water Cooling ER20 collet chunk
Runout off:less than 0.05mm
Germany SKS 4pcs bearing
Grease Lubrication
2. Variable Frequency Drive VFD Inverter 2.2KW 3HP 220VAC
Tech parameters:
Input Voltage: 220V(+/-15%) ,We also stock 380V(+/-15%), please contact usOutput Voltage 110V AC or 220V ACInput Frequency: 48-63 HzOutput Frequency: 0-400 HzInput Phase: 1 or 3 phaseOutput Phase: 3 phaseInverter operation manual:
https://u.pcloud.link/publink/show?code=XZqRwKXZJoPsNIv8BTV2MDYmcpHL40ttM0XX
How to reset the inverter to factory settings? Restore factory settings: P00.13 is set to 10, press the confirm key, then turn off the power and wait until the inverter lights are all off before powering on, otherwise the restoration will failthe parameter of the inverter is :
PD005=400PD004=400PD003=400How to connect:The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number （1.2.3.4 ）on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
3.Engraving Machine Spindle Motor Cooling Water Pump:
Voltage: 220v (can be directly connected to the household power supply)Head: 3.5 mFlow: 3500L / hPower: 80wUsage:Placed directly after the pumps and pipes connected to the tank, the tank water level height should be more than 2.5 times the height of the pump of the best!Avoid dry dry!
\4.Collet :
1set er20 13pcs
(1,2,3.175,4,5,6,7,8,9,10,11,12.7,13mm)
5.clamp:80mm clamp:Usage:Cast aluminium fixture is mainly used for fixation of ancillary products.Thereby ensuring the verticality of balancing and ancillary products.Ancillary products to improve running accuracy, reduce noise, and reduce the accumulated error.
Questions and Answers:Q:Will the spindle work mounted in a horizontal rather vertical position?My concern is with the water cooled nature of the spindle.A:Yes, the water cooling is accomplished with a cavity in the housing around the motor core,so even upside down would work as long as your water pump is adequate.And for some perspective the water pump will work harder to pump the water up to the motor then pumping water through the motor.Q: Is the pump 110V or 220V?A: 220V.Q: How do I get the kit for connecting the motor to the drive?A: First of all, please don't just plug in the power supply. If you just do this, it will easily blow up the inverter and the spindle. The drive must be programmed before running the spindle. If you encounter a problem that you don't understand or don't understand, please contact the supplier and ask them to send you a connection diagram. They also send them information about the drive programming.Q:Will you include a four prong connecter for wiring the motor to thee drive?A cable with a connector would be even better?A:The connector does come with the kit but not the cable.Be very careful about which cable you use .It needs to be heavy shielded VFD cabling,otherwise you can destroy the motor from the amount of EM interference.Q:Can this be wired for 110V?A:This only for 220V, but if you have transformer , you can change the voltage so that can be wired for 110V .Our technical staff will research the new 110V milling spindle in the future ,also ,we sell 110V spindle and inverter ,if you need ,please leave message.Q:How to use the inverter?Do you have English manual?A:Yes, we have English manual,please provide your E-mail, we will send it to you.Q:Do you have CE?A:Yes, we have, pleas leave message, we will send it to you.
