This product is specially designed to amplify weak signals. For weak current, the noise is small, the precision is high, and the signal is restored well. Oscilloscopes are often unable to measure small signals, and the instrument needs to be amplified before measuring.
Application: Electronic engineers, maintenance, R&D personnel, college students and other oscilloscope users. It can also be used in industrial automation measurement and control, because the sensor signal is very weak and needs to be amplified before output.
Note: This product is not a high voltage probe. The high-voltage probe is for high-voltage operation. For strong electricity, it is generally used to measure high-voltage electricity, and the accuracy requirements are not high.
Support differential input and single-ended input. Ultra low noise, high common mode rejection ratio. Long battery life. Exquisite metal shell, strong anti-interference ability
DIY Supplies:ELECTRICAL
Single-ended input voltage: -10V to +10V
Differential Input Voltage: -10V to +10V
Single-ended input impedance: 2M
Differential input impedance: 4M
Output Voltage: -10V to +10V
Magnification: 1x/10x/100x
Bandwidth:
G=1 -- 10M
G=10 -- 10M
G=100 -- 2M
Common mode rejection ratio: Greater than 80DB
Noise : 5nV/√ @1KHz
Power supply: built-in rechargeable lithium battery
Charging interface: USB TYPEC
Battery life: about 5 hours
Working temperature: 0°C-40°C
Working humidity: ≤90%RH
Power consumption: ≤0.2W
Host weight: 150g
color:Blue
Material:Metal
size:115 x 50.5 x 21mm
Package Contents:
1 x Host
1 x 0.5m BNC straight cable
1 x BNC shorting cap
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
