3.2-inch 50KHz~3GHz
Made of fine quality material, practical, easy to operate and use, has a long service life.
Features:
Made of fine quality material, practical, has a long service life.
Portable and compact, easy to use and carry.
Measurement frequency range is 50KHz~3GHz.
High stability, high sensitivity, high accuracy, greatly improved performance.
Metal housing, 3.2-inch large screen is more accurate for touching, easy to operate, no need to connect power, get rid of the shackles of data cable, and can be used alone.
This product can reach 3G, can measure 2.4G antennas, can also measure duplexer, filter.
Specifications:
Material: PCB+metal
Main color: black+gold
Measurement frequency range: 50KHz-3GHz
System dynamic range (after calibration): 70dB (50k to 1.5GHz); 60dB (up to 3GHz)
S11 noise floor (after calibration): -50dB (up to 1.5GHz); -40dB (up to 3GHz)
Sweep rate: 100 points / second
Sweep points (on device): 10-201 points, adjustable
Sweep points (USB): 1-1024 points, adjustable
Power supply: USB, 4.6V–5.5V
RF port: SMA
USB interface: Micro USB
Display screen: 3.2-inch TFT
Battery: 1 * lithium battery, 1950mAh (included)
Port 2 return loss: ≥13dB (up to 3GHz), 20dB (up to 1.5GHz)
Display tracking: 4, Marking: 4, Setting save: 5
Operating ambient temperature: 0-45℃
Item size: 115 * 80 * 27mm / 4.5 * 3.1 * 1.1in
Package size: 180 * 120 * 35mm / 7.1 * 4.7 * 1.4in
Package weight: 330g / 11.6ounce
Note:
1. Software download: https://github.com/nanovna/NanoVNA-QT/releases
2. User guide: https://github.com/nanovna/NanoVNA-QT/master/ug1101.pdf
Packing List:
1 * Vector Network Analyzer
2 * 300mm RF Cable SS405 SMA Double Male Needle
1 * USB Data Cable
1 * Calibration Kit (50Ω Load)
1 * Calibration Kit (Short)
1 * Calibration Kit (Open)
1 * SMA Female to Female Connector
2.8inch 50KHz-3GHz
Specifications:
Material: PCB+acrylic
Color: black
Frequency range: 50KHz-3GHz
System dynamic range (calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 noise floor (calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Sweep rate: 100 points / s
Display: 2.8", 320*240
USB interface: Micro USB
Power: USB, Maximum charge current 1A
Battery: 1 * lithium battery, 1950mAh (included)
Battery connector: JST-XH 2.54mm
Maximum sweep points (on device): 201
Maximum sweep points (USB): 1024
Port 2 return loss (1.5GHz): 20dB typ
Port 2 return loss (3GHz): 13dB min
Package size: 170 * 100 * 35mm / 6.7 * 3.9 * 1.4in
Package weight: 225g / 7.9ounce
Note:
1. VNA-QT software download: https://github.com/nanovna/NanoVNA-QT/releases
2. nanovna-saver: https://github.com/zarath/nanovna-saver/tree/feature/nanovna-v2
3. User guide: https://github.com/nanovna/NanoVNA-QT/raw/master/ug1101.pdf
Packing List:
1 * S-A-A-2 Host (with 1950mAh battery)
1 * Micro USB Data Cable
2 * 300mm SMA Male to Male SS405 RF Cable
1 * SMA Male Calibration Kit-OPEN
1 * SMA Male Calibration Kit-SHORT
1 * SMA Male Calibration Kit-LOAD
1 * SMA Female to Female Connector
1 * Set of Accessories
4.0-inch 50KHz~3GHz
This 3G Vector Network Analyzer with 4.0 inch touching screen and the measurement frequency ranges is 50KHz~3GHz, if you need it, come and have a try, it will not let you down.
Features:
Made of fine quality material, practical, has a long service time, you do not need to change it often.
Portable and compact, easy to operate and carry, also easy to storage.
4.0 inch TFT LCD touching screen display. let you see the data more clearly.
Measurement frequency ranges is 50KHz~3GHz, has a wide applications.
High stability, high sensitivity and high accuracy, greatly improved performance.
EVA storage bag is convenient for storage and carrying.
Specifications:
Main material: PCB+iron
Color: black
Battery: 1 * lithium battery, 3000mAh (included)
Measurement frequency range: 50KHz-3GHz
Frequency tolerance: ＜2ppm
Frequency stability: ＜0.5ppm
System dynamic ranges (calibration): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 noise floor (calibration): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Sweeping rate: 100 points / second
Display: 4.0 inch, 320 * 480
USB interface: Micro USB
Power supply: USB, maximum recharging current 1A
Battery connector: JST-XH 2.54mm
Maximum sweeping points (on device): 201
Maximum sweeping points (USB): 1024
Port 2 return loss (1.5GHz): 20dB typ
Port 2 return loss (3GHz): 13dB MIN
Item size: 117 * 85 * 25mm / 4.6 * 3.3 * 1.0in
Item weight: 368g / 13.0ounce
Package size: 215 * 137 * 85mm / 8.5 * 5.4 * 3.3in
Package weight: 972g / 2.1lb
Packing List:
1 * SAA-2N Host
1 * Micro USB Data Cable
2 * 500mm N-type Male to Male RG142-PUR RF Cable
1 * N-type Male Calibration Kit-OPEN
1 * N-type Male Calibration Kit-SHORT
1 * N-type Male Calibration Kit-LOAD
1 * N-type Female to Female Connector
1 * EVA Storage Bag
1 * Touching Screen Paddle and Lanyard
4.3inch 50kHz-3GHz
This portable vector network analyzer is a new product. It uses a 4.3-inch IPS LCD display and an aluminum alloy case. It is equipped with a 5000mAh large-capacity lithium battery as standard. Support touching screen and side button operation, support Chinese and English interface. The design of this product is based on OwOcomm's S-A-A V2, and deep optimization of the software is made on the basis of the previous product. The measurement ranges is extended to 3GHz, and the dynamic ranges is larger. The measurement is more accurate and the operation is more convenient.
Features:
4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes.
All aluminum alloy case, effectively shielding electromagnetic interference to ensure measurement accuracy.
The radios frequency interface is SMA, which is convenient for connecting various tested parts.
Full touching screen design, with 3 side buttons at the same time, flexible and convenient operation.
Support Chinese and English interface.
Optimized UI design, convenient for users to perform measurement operations.
Support screen brightness adjustment.
The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable.
Standard fine quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy.
Designed with USB power output interface, which can support 5V/1A power output.
Using 2A high current recharging IC, the recharging time is shorter.
Supporting host computers software, the host computers supports Chinese and English interfaces.
The screen images of the device can be obtained by taking a screenshot of the host computers.
Function: can measure S parameters, voltage standing waves ratio, Smith chart, phase, group delay, etc.
Specifications:
Material: aluminum alloy(case)
Main color: black
Battery: 1 * lithium battery, 5000mAh
Frequency: 50kHz-3GHz
RF output power: -9dBm (error within 1GHz: ±1dB)
Frequency accuracy: <0.5ppm
S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz)
S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz)
2-port return loss: 20dB typ (1.5GHz), 13dB min (3GHz)
Number of calibration points: 101 points
Number of scanning points: 101 points
Number of traces: 4
Number of mark points: 4 (the mark point bar can be moved up and down on the screen)
USB interface: USB Type-C communication mode: CDC (serial)
Setting save: 5 groups (after saving, it can be directly recalled when it is used again, no need to recalibrate, and the saved parameters before the last shutdown will be automatically recalled when it is turned on again)
Support calibration results interpolation, can measure without recalibration after adjusting the measurement frequency band
Scan time: about 1.9s/1 time (50kHz~3000MHz full frequency band)
Item size: 140 * 73 * 20mm / 5.5 * 2.9 * 0.8in
Item weight: 270g / 9.5ounce
Packing size: 250 * 150 * 50mm / 9.8 * 5.9 * 2.0in
Packing weight: 507g / 1.1lb
Packing List:
1 * Host
1 * SMA Open Calibration Kit
1 * SMA Short-circuit Calibration Kit
1 * SMA 50Ω Load Calibration Kit
1 * SMA-KK Double Heads Female Hole Adapter
1 * SMA-JJ Double Heads Male Pin Adapter
1 * SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Adapter
2 * 200mm SMA-JJ RG405 RF Cable
1 * USB Type-C Data Cable
1 * Styluss
