1.5KW Water Cooled Spindle Motor+1.5kw VFD Inverter+65mm Clamp+Water Pump/5m Pipe+13pcs ER11 For CNC Milling Woodworking Machine
Package List:
1 x 1.5KW CNC Water Cooled Spindle1 x 1.5KW VFD Inverter1 x 3.5M Water Pump1 x 5M Water Pipes1 x 65mm Spindle Clamp13 x ER11 Collet (1,2,3.175,4,5,6,7,8,9,10,11,12.7,13mm)Fearture：
1. Water-cooled spindle motorSize: 65mmPower: 1500WVoltage: 220V/110VFrequency: 0-400HzSpeed: 0-24000rpmCurrent: 8AWater Cooling ER11 colletRunout off: less than 0.1mmGermany SKS 4pcs bearingBearing type: NSK6002*4Grease Lubrication2. Inverter:Input Voltage: 110V/220V(+/-15%)Power: 1.5KWOutput Voltage: 110V/220V ACInput Frequency: 48-63 HzOutput Frequency: 0-400 HzInput Phase: 1 or 3 phaseOutput Phase: 3 phase3. ER11 Collet 1 Set:Gripping Range: 1MM to 13MM (1,2,3.175,4,5,6,7,8,9,10,11,12.7,13mm)4. Water Pump:Voltage: 110V/220VStructure: Single-stage PumpPressure: High PressureApplication: SubmersibleUsage: Water5. 5M Water Pipes:Size:5M 6mm (ID)*8mm (OD)6. Spindle Motor Clamp Mount:Diameter: 65mmMaterial: Aluminum,Surface sandblastedApplication: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producingNoted:
The hole in the middle of our clamp is not punched through. The middle screw is the jack screw. The function of the two screws on the left and right is to lock. The middle screw function is used when disassembling the spindle. Loosen the screws on both sides and tighten the middle screw, the whole fixture will be opened. the function is easy to take out the spindle.
Warranty Service:
We will provide 1 year warranty and we will solve all your after-sales problems! We will check all the goods before sending, we make sure you receive high quality products! But If you have any advise, please feel free to contact us. Please don't give bad reviews casually.
